VANCO LCD1440 - Manual (Page 3)

-6-
Allen wrench
F
G
A,B,C
-3-
Part 1a-Wood Stud Mounting
.
Use wall plate as a template, make sure it is level, and mark four mounting
holes on the wood studs. Drill four 3/16
)
) . .
” ” (4.5mm)dia holes 2 (50mm) deep.
Level wall plate and attach to wall with four long bolts(D and four washers
(H . Tighten bolts firmly Do not overtighten
Part 1a-Wood Stud Mounting
Wood stud
Stud finder
D
H
Lift the screen and hook spacers(F) on to the wall plate. Fasten the bottom of the
screen to wall plate using two selected bolts and two spacers(G). Tighten bolts
firmly. Do not overtighten.
Allen wrench may be needed to adjust the swivel of the mount. NOTE:
2 50mm) ” (
3/16 (4.5mm) ”