VANCO WM1024E - Manual (Page 4)

-4- -5-
Part 1b-Concrete Wall Mounting
Level wall plate and use wall as a template to mark two holes. Drill two 7/16
(10.5mm) dia. holes 2 (50mm) deep. Insert two anchors(G) into holes and secure
wall plate with two long bolts(H) and two washers(F).Tighten screws firmly.
Do not overtighten ”
”
.
Part 1b-Concrete Wall Mounting
Concrete Wall
G
2 ( ” 50mm)
Φ7/16 (10.5mm) ”
Bubble level
H
F
Part 2-Attaching Adapter Bracket to Screen
Determine the proper VESA mounting configuration for your screen using
detail 1. If attaching to screen with Curved back select the small(B) or
medium(D) screws. Attach adapter bracket to screen using four selected
screws and four spacers(E) as shown in figure 1.
If attaching to screen with flat back select the small(A) or medium(C)
screws. Attach adapter bracket to screen using four selected screws as
shown in figure 2. Tighten screws firmly. Do not overtighten
.
Part 2-Attaching Adapter Bracket to Screen
E B/D
A/C
Figure 1
Figure 2