Milton Industries Filter 1022-10 - Form 8X711 - Manual

ITEM DESCRIPTION
1022-8
KIT NO.
1022-10
KIT NO.
CONTENTS
3 Element Kit 1022-18 1022-20
40 Micron Sintered
Bronze Element
1022-28 1022-30
5 Micron Sintered
Bronze Element
1,2,4,5 Repair Kit 1022-13 1022-14
Gasket, Vane Baffle,
Threaded Rod,
Lower Baffle
6,7,9 Bowl Kit
1022-11
10 oz.
1022-12
20 oz.
Metal Bowl w/Sight.
Overnight Drain &
O-ring.
Not Shown
Sight Kit
Replacement
1022-2 1022-2
Sight Tube, Retainer (2)
Indicator Ball, O-ring (4)
8 Auto Drain 1168 1168
Float Drain Assembly,
Bowl, Insert, O-ring,
Retainer Ring
6 Bowl O-ring 1022-15 1022-15 O-ring
9 Overnight Drain 1120-16 1120-16
Overnight Drain for
Metal Bowl
4500 WEST CORTLAND STREET
CHICAGO, ILLINOIS 60639
MIDSIZE 3/4" FILTERS: 1022-8 & 1022-10
Bowl Max Pressure Temperature Range
Metal W/Sight 250 PSI 40ºF to 160ºF
WARNING!: For Compressed Air Service only. Not to be used on life
support or breathing air systems. Metal bowl sight glass is made of
polycarbonate and will crack or rupture if exposed to any chemicals,
such as synthetic oils, that are unsuitable for use with
polycarbonate.
INSTALLATION: Install Filter units so the air flow is in the direction of the
arrow on the head of the unit. The filter should be installed upstream of
any regulators, and lubricators. The filter should also be placed as close
as possible to the air tool, or apparatus being utilized.
WARNING!: Units are die cast aluminum, do not torque when
installing. Also, pressurize unit slowly after installation of unit or
new element to avoid damage to element.
MAINTENANCE AND OPERATION: When there is air flow, any foreign
particles, and the separation of moisture, is automatic, There are no
moving parts and no adjustments necessary. Any sludge and moisture
that has collected, should be drained off. Sediment should not be allowed
to reach the lower baffle. The Automatic Overnight Drain will automatically
drain accumulated oil and moisture when line pressure falls below 5 PSIG.
The Overnight Drain can also be operated manually by turning in a counter
clockwise rotation.
The unit should be cleansed at regular intervals. Depressurize the system,
unscrew the bowl and then unscrew the sintered bronze element from the
head. Wash the element with a mild dishwasher detergent and rinse
thoroughly to maintain the filtering efficiency. Make sure the element is
completely dry before reassembling the unit (the filter element may be
blown dry). Clean the filter bowls with soapy water only. Examine the
O-ring, and replace it if damaged or distorted. When reassembling use
care not to strip the threads on the bowl. After the bowl has been
tightened completely, it may be necessary to line up sight glass for proper
viewing by backing-off up to 180º.
FILTER
INSTRUCTION SHEET
FORM NO. 8X711 1-1-97