DeLOCK 89040 - Manual (Page 3)

-3-
Hardware Installation
Note:
Follow the general instructions for installation of the card. If necessary,
read the manual of your computer, or ask a specialist for help.
1. Turn off your PC, and unplug the power cord.
2. Open the housing.
3. Remove the slot holder from the available PCI slot.
4. Insert the card straight and carefully into the free PCI slot, until it is well
seated.
5. Use a screw to attach the card to the housing.
6. Reattach the housing, and connect the power cord the AC adapter.
Driver Installation
Windows XP
1.Start Windows after you install the card. The Hardware Wizard will
announce that “New Hardware was found”. The driver is found and
installed automatically.
Windows 98/98SE/ME/2000
1.Start Windows after you install the card. The Hardware Wizard will
announce the “New Hardware was found”. The driver is found and
installed automatically.
2.Click on ”Next”.
3.Highlight the line “Install the software automatically
(Recommended)” in the new window, and click on “Next”.
4.Insert the driver CD into the drive, and select the option to “Browse”
the CD drive. Locate the folders “VIA” and “VT62X2” on the CD. The
driver is selected. Confirm the choice by clicking on “Next”.
5.After installation of the driver click on “Next” and “Finish”, to bring
the installation to an end.