DeLOCK 89135 - Manual (Page 3)

- -
Hardware Installation
Note:
Follow the general instructions for installation of the product. If necessary, read
the manual of your computer, or ask a specialist for help.
1. Turn off your PC and unplug the power cord.
2. Open the housing.
3. Remove the slot holder from the available PCI Express slot.
4. Insert the card straight and carefully into the free PCI Express slot, until it is
well seated.
5. Use a screw to attach the card to the housing.
6. Reattach the housing, and connect the power cord to the AC adapter.
Driver Installation
1. When the installation of the device is finished, the driver will be automatically
installed after you restart the computer.
2. You can start using the device immediately.
Support Delock
If you have further questions, please contact our customer support
[email protected]
You can find current product information on our homepage: www.delock.com
Final clause
Information and data contained in this manual are subject to change without
notice in advance. Errors and misprints excepted.
Copyright
No part of this user manual may be reproduced, or transmitted for any purpose,
regardless in which way or by which means, electronically or mechanically,
without explicit written approval of Delock.
Edition: 03/2013