Velleman CAMCOLVC14 - Manual (Page 5)

CAMCOLVC14
20.09.2010 ©Velleman nv 5
4. Features
• extremely portable weatherproof camera with different mounting brackets
• the video capture camera records images on micro SD card (not included)
• only one operation push button
• webcam function
• AV output to show the recorded images directly on a TV
• comes with: USB cable, AV cable, bike bracket and strap bracket
5. Overview
Refer to the illustrations on page 2 of this manual.
1 camera 10 power LED
2 camera lens 11 power button
3 rear cap 12 microphone
4 camera holder 13 VGA/QVGA selector
5 locking nut 14 AV output
6 release knobs 15 SD card slot
7 strap bracket 16 USB port
8 bike bracket 17 battery On/Off switch
9 charge LED 18 top indicator
6. Use
Refer to the illustrations on page 3 of this manual.
Strap mounting bracket [7]
• Hold the strap bracket [7] as indicated and insert the rubber or Velcro strap.
• Place the strap over your helmet (rubber strap) or your arm, wrist … (Velcro
strap).
Bicycle mounting bracket [8]
• Place the bike bracket [8] over the handlebar grip and secure it tightly with the
bolt and nut.
Camera
• Slide the camera into the holding bracket [4] and slide the holding bracket [4]
in the strap [7] or bike [8] bracket until the release knobs [6] snap into place.
• Release the locking nut [5] and point the camera towards the field of interest.
Make sure the top indicator [18] is on top.
• Tighten the locking nut [5].
• To release the holder [4] from the strap [7] or bike [8] bracket, press the
release knobs [6] towards each other and pull.
Operation
• Unscrew the rear cap [3] and insert an SD card (not incl.) in the SD card slot
[15] (connections facing USB port [16]).
• Set the battery on/off switch [17] to ON (left).
• Set the VGA/QVGA selector [13] to VGA or QVGA:
VGA: resolution 640 x 480
QVGA: resolution 320 x 240