Velleman CAMCOLPIR1 - Manual (Page 4)

CAMCOLPIR1
V. 01 – 07/03/2013 4 ©Velleman nv
2. Use the bracket [4] to mount the camera in the required place.
3. Connect the power connector [1] to the 12 VDC power supply (not
incl.).
4. Connect the BNC connector [2] to a monitor (not incl.).
5. Technical Specifications
pick-up element 1/3" Sony colour CCD image sensor
number of pixels 500 (H) x 582 (V) - PAL -
resolution 500 TV lines
min. illumination 0 .01 lx
S/N ratio 48 dB (AGC off)
electronic shutter 1/50 to 1 /100 000 s
white balance automatic
AGC yes
lens f3 .7mm pinhole
lens angle 78°
video output 1 .0 Vpp composite, 75 Ω
power supply 12 Vdc (use PS1205R, not incl.)
consumption 100 mA
operating temperature -10 °C to +45 °C
dimensions
70 x 40 x 119 mm
weight 250 g
Use this device with original accessories only. Velleman nv cannot
be held responsible in the event of damage or injury resulting f rom
(incorrect) use of this device.
For more inf o concerning this product and the latest version of this
manual, please visit our website www.velleman.eu.
The inf ormation in this manual is subject to change without prior
notice.
© COPYRIGHT NOTICE
The copyright to this manual is owned by Velleman nv. All
worldwide rights reserved. No part of this manual may be copied,
reproduced, translated or reduced to any electronic medium or otherwise
without the prior written consent of the copyright holder.