Velleman CAMCOLBUL31 - Manual (Page 4)

CAMCOLBUL31
V. 02 – 31/05/2012 4 ©Velleman nv
• Protect this device from shocks and abuse. Avoid brute force when
operating the device.
• DO NOT use this product to violate privacy laws or perform other illegal
activities.
4. Features
• weatherproof
• with B/W night vision (IR LEDs)
• vandal proof camera
• with 3-axis bracket.
5. Overview
Refer to the illustrations on page 2 of this manual.
1 IR night LEDs 5 mounting bracket
2 lens 6 bracket joint 1, knurled ring
3 light sensor 7 bracket joint 2, Allen screw
4 sun shield 8 bracket joint 3, Allen screw
6. Hardware installation
1. Choose a location for the camera, keeping following guidelines in
mind:
o
do not install the camera in locations where extremely high or low
temperatures or excessive vibrations may occur.
o
avoid mounting the camera near high electro-magnetic fields.
o
do not aim the camera at the sun or other extremely bright objects
or reflections (e.g. metal doors).
2. Use the mounting bracket [5] to determine the location of the
mounting holes. Drill the holes and secure the bracket [5] using
screws.
3. Connect the power connector [B] to the 12VDC power supply
(not incl.).
4. Connect the BNC connector [A] to a monitor (not incl.).
5. Loosen the 3 bracket joints using the knurled ring [6] and the Allen
screws [7-8]. Point the camera towards the field of interest, then
tighten the ring and screws.