GLOBALSAT TR-206 - Manual (Page 52)

51
7. Alert
7.1 Emergency
When SOS (Emergency) button is hold and pressed over 2 seconds, The SOS
alarm flag will be raised and TR-206 will start to send emergency reports by
SMS and/or TCP/UDP with the interval defined by ‘H2’.
The SMS reports can be configured to send to maximum 6 sets of phone
numbers. The number of reports is defined by ‘H1’. If you’d like to stop SOS
report, please send “Na” command to TR-206.
Emergency report can also be sent to server by TCP or UDP. The number of
report is defined by ‘H3’. If H3 is set to zero, then the report will be sent
continuously until the SOS flag is dismissed by server.
The related parameters are listed in the following table:
Code
word
Parameters Value Description
G0 SMS Phone number 1 char(20)
G1 SMS Phone number 2 char(20)
G2 SMS Phone number 3 char(20)
G3 SMS Phone number 4 char(20)
G4 SMS Phone number 5 char(20)
G5 SMS Phone number 6 char(20)
H0 Report media
Media
type
Please refer to 2.9 Report
media
H1 Number of SMS Report u16 1 ~ 65535
H2 report interval u16 3 ~ 65535
H3 Number of GPRS Report u8
0=continue sending SOS
alarm report till receive stop
command