Connection – Velleman CAMSCC18 User Manual
Page 6
CAMSCC18
02/03/2011
6
©Velleman
®
nv
PRIVACY
ON
DAY/NIGHT
COLOR
NR
CAMERA ID
OFF
LANGUAGE
ENGLISH
CAMERA RESET
BACK
EXIT
SAVE ALL
Submenu overview:
SUB-MENU
DESCRIPTION
LENS
Select and set the type of your lens: D.D., V.D., or board lens.
SHUTTER / AGC
Select “AUTO” to allow the camera to act automatically when
the light condition of the environment changes.
Select “MANUAL” to fix the shutter and AGC modes of the
camera no matter how the light condition of the environment
changes.
WHITE BAL
Process the current image to retain colour balance over a colour
temperature range.
BACKLIGHT
Adjust the image to compensate for an area that is
overpowered by brightness because of excessive light.
“BLC” is to automatically adjust the level of the light to show
more details in the dark environment.
“HLC” is to mask extremely bright areas.
PICT ADJUST
Adjust the colour of the pictures in, for example, brightness,
contrast, sharpness and hue.
ATR
D-WDR to increase the image recognisability of the
overexposed and dark areas.
PRIVACY
Mask areas that should be not visible.
DAY / NIGHT
Set the night surveillance mode to colour or B/W.
NR
Reduce noise by separating luminance (Y) and chrominance (C)
settings.
CAMERA ID
Set the title of the camera.
LANGUAGE
Select the language of the menu on-screen display.
CAMERA RESET
Press to restore all settings to their factory default values.
6.
Connection
•
Mount a lens (not incl.) on the camera.
•
Connect the video output [6] to the video input of a monitor (not incl.). Use a
75Ω coaxial cable (not incl.).
•
Connect the audio output [8] with the audio input of a monitor (cable not incl.).
•
Connect a 12VDC power supply (not incl.) to the power input [5].
•
When using a video driven lens, connect the video drive cable (not incl.) to the
auto iris lens connector [3].
•
To adjust the focus of the camera, loose the lock screw [2] on the flange
adjustment ring [1], turn the ring until the desired focus is reached and
retighten the lock screw [2]. Adjusting the focus should be done by a qualified
technician.