Velleman CTC1000RC - Manual (Page 5)

CTC1000RC
V. 01 – 12/06/2013 5 ©Velleman nv
 Only use the device for its intended purpose. Using
the device in an unauthorised way will void the
warranty.
4. Features
 4 buttons: arm / disarm / partial arm / panic alarm
 IP rating: IP41
 LED: transmission indicator
 low battery detection
5. Buttons
Refer to the illustrations on page 2 of this manual.
Function Description
1 away button Press this button to arm the
system
2 panic button Press and hold this button for
3 seconds to send a panic
alarm.
3 home button Press this button to set the
system in home mode
4 disarm button Press this button to disarm
the system.
If the alarm is sounding,
pressing the disarm button
will turn off the alarm except
if the alarm was triggered
from a panic button or the
remote control itself.
5 LED indicator The red LED indicates a