Velleman PEM7D - Manual (Page 3)

PEM7D
V. 02 – 27/11/2013 3 ©Velleman nv
USER MANUAL
1. Introduction
To all residents of the European Union
Important environmental information about this product
This symbol on the device or the package indicates that disposal of
the device after its lifecycle could harm the environment. Do not
dispose of the unit (or batteries) as unsorted municipal waste; it
should be taken to a specialized company for recycling. This device
should be returned to your distributor or to a local recycling
service. Respect the local environmental rules.
If in doubt, contact your local waste disposal authorities.
Thank you for choosing Velleman! Please read the manual thoroughly before
bringing this device into service. If the device was damaged in transit, don't
install or use it and contact your dealer.
The PEM7D is a compact entry and approach warning system for use in
shops, reception areas, private homes, etc. The device consists of a
transmitting and receiving unit that transmits an invisible, modulated beam
of IR light across e.g. a doorway, onto a prismatic reflector mounted across
from the transmitter. This reflects the beam back to the receiver to
complete the protection circuit. The beam is interrupted when a person
walks through it, causing the alarm to trigger and sound an audible warning.
The beam is produced by a LED, which has a much greater lifespan and is
less susceptible to surge and vibration damage than a tungsten filament
lamp. The receiver is only sensitive to the frequency of the modulated light
in the beam.
Notes
•
It is recommended to use this device indoors. Rain drops and
condensation may influence its operation.
2. Safety Instructions
Keep the device away from children and unauthorised users.
There are no user-serviceable parts inside the device. Refer to an
authorized dealer for service and/or spare parts.
3. General Guidelines
Refer to the Velleman® Service and Quality Warranty on the last pages
of this manual.