Velleman SOL6N - Manual (Page 2)

SOL6N - 2 - VELLEMAN
SOLAR CELL TRICKLE CHARGER FOR 12V BATTERY
1. Introduction & Features
To all residents of the European Union
Important environmental information about this product
This symbol on the device or the package indicates that disposal of the device after its lifecycle could harm
the environment. Do not dispose of the unit (or batteries) as unsorted municipal waste; it should be taken to
a specialized company for recycling. This device should be returned to your distributor or to a local recycling
service. Respect the local environmental rules.
If in doubt, contact your local waste disposal authorities.
Thank you for buying the SOL6N! This solar cell trickle charger helps to avoid battery drain for 12V batteries (e.g. car
batteries). When batteries go flat, they may be seriously damaged and may never regain their full power. Please read
the manual thoroughly before bringing this device into service. Read the warranty information below
IMPORTANT: warranty!
• The warranty automatically becomes void if the user personally tries to repair or modify the device.
• The warranty also becomes void in case of damage caused by inappropriate or excessive use or the disregard of
standard safety prescriptions in general and those in this manual in particular.
• The warranty is not applicable to parts that, because of their nature, wear fast during normal use (e.g. batteries,
lamps, belts, etc.).
• When the device has been found not faulty, fixed costs may be charged. Read the manual thoroughly before
returning the device.
• Velleman Inc. does not accept responsibility for personal injury caused by the disregard of the safety instructions
in this manual. This also goes for all types of consequential loss.
• Warranty repair procedure: the device needs to be sent back in the original packaging, together with all
accessories and a copy of the invoice or the receipt. Transportation damages caused by insufficient protection are
at the expense of the customer and are not covered by the warranty.
• Removal or obliteration of any serial number may void the warranty.
2. Characteristics & Contents
• double glass lamination
• waterproof
• plastic frame
• flashing charging indicator
• built-in blocking diode
• easy to install & maintenance-free
• 4 precut holes for installation & 4 stainless steel screws
• supplied with battery clamps and cigarette lighter plug adapter
• 10ft of cable
3. Specifications (*)
Dimensions (mm)
352 x 338 x 16
Output voltage 13.5V
Output current 350mA
Power output 5W (with charging indicator)
(*) This device was tested under standard conditions: AM1.5, 100mW/cm², module at 25°C