beautypg.com

Compact solar generator in briefcase design – Velleman SOL8 User Manual

Page 2

background image

SOL8

- 2 -

VELLEMAN

COMPACT SOLAR GENERATOR IN BRIEFCASE DESIGN

1. Introduction & Features

To all residents of the European Union
Important environmental information about this product

This symbol on the device or the package indicates that disposal of the device after its lifecycle could harm
the environment. Do not dispose of the unit (or batteries) as unsorted municipal waste; it should be taken to

a specialized company for recycling. This device should be returned to your distributor or to a local recycling
service. Respect the local environmental rules.

If in doubt, contact your local waste disposal authorities.

Thank you for buying the SOL8! It is a powerful solar charger for 12V batteries, and is ideal for use on caravans, boats
etc. When batteries go flat, they may be seriously damaged and may never regain their full power. Please read the

manual thoroughly before bringing this device into service. If the device was damaged in transit, don't install or use it
and contact your dealer.

2. Content


1. Solar cells

2. Charging indicator (green LED)
3. Cable

4. Connector for battery clips
5. Connector for cigarette lighter plug

6. Connector for cigarette lighter socket

IMPORTANT: in some vehicles and boats, the cigarette lighter may not be connected when the ignition is turned off.
In such cases, connect the SOL8 directly to the car battery by means of the battery clips. Connect the black lead to

the negative (-) pole and the red lead to the positive (+) pole.

3. Operation


1. Flip the supports open (see fig. 1) and unfold the solar generator. .

2. Put the solar panel in the place that is most often exposed to direct sunlight, and face it toward the sun. Adjust the

angle of the solar panel for maximum sun exposure.

3. As long as there is sufficient sunlight, the green LED (fig. 2 #2) will be on (or flash) to indicate the panel is

generating electricity.

4. Choose the correct connector according to your application; connect it to the solar panel and to the application.

Fig. 1

Fig. 2