DeLOCK 70146 User Manual

Page 4

RAID function

Please note:

1. If you install and activate a Raid system, make sure you have a full back up

of your present data.

2. Especially with used hard disks you should perform a Low-Level-formatting,

before creating a Raid system. You can find Tools at you producer of the

hard disk.

Installation Raid-Tool

You can use the program Raid Tool if you want to set up Raid 1 and 0 and if you

do not want to set it in the Bios.

1. Open Windows Explorer, select: CD-drive\VIA\VT642x\Windows\Setup.exe.

2. Click on "Next".

. Click on "I agree", after that click on "Next".

4. Click on "Next". Click on "Next".

5. The installation will now be completed, click on „next“.

6. Choose "Yes, restart computer" and click "Next".

7. After restart, Raid Tool Software is installed.

Support Delock

If you have further questions, please contact our customer support

You can find current product information on our homepage: www.delock.com

Final clause

Information and data contained in this manual are subject to change without

notice in advance. Errors and misprints excepted.

Copyright

No part of this user's manual may be reproduced, or transmitted for any purpose,

regardless in which way or by which means, electronically or mechanically,

without explicit written approval of Delock.

Edition: 02/2013