DeLOCK 54368 User Manual
DeLOCK Hardware
Delock SATA 3 Gb/s Flash Modul 2 GB Vertikal / Low Profile
Description
The SATA 3 Gb/s Flash Module is due to its very small size
and high shock resistance ideal for application of mobile
devices like IPCs, measuring systems as well as Digital
Signage etc. Additional snap in will be provided by metal
clips on the SATA connectors.
Specification
• Capacity: 2 GB
• 7 pin SATA 3 Gb/s interface
• Chip: SLC (Single Level Cell)
• Operating voltage: 5 V +/-5%
• Operating temperature: 0 °C ~ + 70 °C
• Power consumption: read: 230 mA
write: 330 mA
idle: 130 mA
• Transfer modes: SATA 3 Gb/s, SATA 1.5 Gb/s, PIO 0~4, MDMA 0~2, UDMA 0~6
• S.M.A.R.T. & i-S.M.A.R.T. supported
• Endurance: 100.000 cycles
• Read: up to 30 MB/s; write: up to 25 MB/s
• MTBF: > 3.000.000 hrs
• Vibration: 20G / 7~2000 Hz
• Shock: 1500 G / 0.5 ms
• Dimension: 32.9 x 29.5 x 9.0 mm (LxWxH)
Item No. 54368
EAN
4043619543687
Country of origin
TAIWAN, PROVINCE
OF CHINA
System requirements
• A free SATA 7 pin port
• Power supply with a free Molex power connector
Package content
• 2 GB SATA Flash module
• Power cable
Package
• Antistatic cover
© 2013 by Delock. All names and symbols mentioned here are property of the respective producer. Printing errors, changes and errors excepted.
www.delock.com
1