Milton CAT D5K - Manual (Page 10)

D5K Track-Type Tractor Specifications
10
Undercarriage
Number of rollers 7
(each side)
Number of shoes
40
(each side) – SALT
(Sealed and
Lubricated Track)
Undercarriage
Number of
36
shoes (each side)
– SystemOne
Undercarriage
Shoe width – XL
510 mm 20 in
Shoe width – LGP 770 mm 30 in
Shoe width – LGP 660 mm 26 in
Length of track on 2310 mm 91 in
ground – XL
Length of track on 2310 mm
91 in
ground – LGP
Track gauge – XL
1600 mm 63 in
Track gauge – LGP 1750 mm 69 in
Track gauge – LGP 1860 mm 73.2 in
with 770 mm
(30 in) shoes
Ground contact area 23 562 cm
2 3,652 in 2
– XL
Ground contact area 30 492 cm
2 4,726 in 2
– LGP
Ground contact area 35,574 cm
2 5,514 in 2
– LGP with 770 mm
(30 in) shoes
Ground pressure
39.1 kPa 5.67 psi
– XL
Ground pressure
31.1 kPa 4.52 psi
– LGP
Ground pressure – 27.1 kPa
3.93 psi
LGP with 770 mm
(30 in) shoes
• Hydraulic track adjusters.
• Box section track roller frames.
• Bolt-on rear track guiding guards.
• Full length recoil guarding with sprocket
guards and wipers.
• Serrated, two-piece split master link
(SALT).
• Single-grouser shoes.
• Segmented sprocket (SALT).
• Sealed and lubricated rollers and idlers.
Standards
ROPS SAE J397-OCT95,
SAE J1040-MAY94,
ISO 3471-94,
ISO 3164-95
FOPS SAE J231-JAN81,
ISO 3449-92
Ripper
Type Parallelogram
Number of shanks 3
Maximum digging 337.5 mm 13.3 in
depth
Maximum reach
555 mm 21.9 in
at ground line
Maximum ground
448 mm 17.6 in
clearance under tip
Overall width
1710 mm 67.3 in
Height 165 mm 6.5 in
Weight 554 kg 1,222 lb
Winch
Weight 610 kg 1,345 lb
Winch drive Hydrostatic
Control Hydraulic
Speed Variable
Winch length 705 mm 27.76 in
Overall width 741 mm 29.2 in
Drum diameter 254 mm 10 in
Drum width 274 mm 10.8 in
Throat clearance 171.5 mm 6.75 in
Rope diameter – 16 mm 0.63 in
recommended
Rope diameter –
19 mm 0.75 in
optional
Drum capacity –
113 m 371 ft
recommended cable
Drum capacity –
78 m 256 ft
optional cable
Maximum line pull 18 144 kg 40,000 lb
– bare drum
Maximum line pull 11 340 kg 25,000 lb
– full drum
Maximum line
40 m/min 131 ft/min
speed – bare drum
Maximum line
63 m/min 207 ft/min
speed – full drum
• Infinitely variable line speed and line pull
from 0 to maximum.
• Power in/power out, brake off, free spool
(standard equipment).
• Single lever, low effort hydraulic control.
• Precise load control and speed modulation.
• Integral mounted drawbar.
• 3 roller fairlead available. Kit available to
add a 4th roller.