Milton CAT RM 500 - Manual (Page 12)

12 RM-500 specifications
Operating Dimensions
A Overall length 9.68 m 31' 8"
B Overall machine width 2.98 m 9' 7"
C Width at rear wheels 2.82 m 9' 2"
D Rotor hood width 2.53 m 8' 3"
E Height at ROPS 3.48 m 11' 4"
F Height at cab (if equipped) 3.39 m 11' 1"
G Height at handrail 3.36 m 11'
H Wheelbase 6.25 m 20' 5"
I Ground clearance 530 mm 20.8"
Inside turning radius 3.7 m 12' 1"
R RM-500
Operating Weights
Weights shown are approximate and include coolant, lubricants, 50% fuel level and
a 75 kg (165 lb) operator.
Machine Weights with open platform
with universal rotor
27 165 kg 59,900 lb
with soil rotor 26 940 kg 59,400 lb
with combination rotor 26 170 kg 57,700 lb
Optional Configurations (add to above figures)
ROPS
512 kg 1130 lb
FOPS 213 kg 470 lb
Cab 468 kg 1030 lb
I
B
F G
H
C
E
A
Rotor Options
Three rotor styles are available. All mount to the standard mixing chamber.
Breaker bars are included with the universal rotor.
Rotor Width Diameter Tools Max. Depth
Universal 2438 mm (96") 1375 mm (54") 200 406 mm (16")
Soil 2438 mm (96") 1625 mm (64") 238 508 mm (20")
Combination 2438 mm (96") 1625 mm (64") 114 508 mm (20")
Service Refill Capacities
Liters Gallons
Fuel tank (useable) 1056 279
Cooling system 81 21.4
Engine oil w/filter 34 8.9
Propel planetary gear reducer (each)
Front
5 1.3
Rear 4 1
Hydraulic tank 233 61.5
Rotor drive axle 17 4.5
Rotor bearing reservoir 12 3.2
Chain case (each) 25.6 6.8
Rotor drive planetary
gear reducer (each)
3.8 1
Rotor transmission 12.4 3.25
Engine
The Caterpillar ® C15 engine with
ACERT™ Technology is a six cylinder,
turbocharged air-to-air after-cooled
diesel engine. The engine meets U.S.
EPA Tier 3 and European EU Stage IIIa
engine emission regulations.
Engine Cat ® C15
Gross Power kW hp
SAE J1995 403 540
Net Power kW hp
ISO 9249 403 540
EEC 80/1269 403 540
SAE J1349 399 535
Specifications
Bore 137 mm 5.4"
Stroke 171 mm 6.7"
Displacement 15.1 liters 923 in 3
■ The power ratings apply at a rated
speed of 2000 RPM when tested
under the reference conditions for the
specific standard.
■ The net power advertised is the
power available at the flywheel when
the engine is equipped with an
alternator, air cleaner, muffler and fan
at minimum speed.
■ The net power at the flywheel when
the fan is at maximum speed is 379
kW (508 hp) per the SAE J1349
reference standards.
■ The engine provides a torque of
2356 Nm (1738 lb/ft).
■ Derating is not required up to an
altitude of 1067 m (3500').
D