Milton CAT 65E - Manual (Page 2)

Operating Weight
• Front 4,700 lb
• Rear 12,100 lb
• Total 16,800 lb
Engine
• Make/Model Cummins QSB4.5
• Type 4 Cycle, turbo diesel
• No. of cylinders 4
• Displacement 275 cu. in.
• Horsepower 110
• Rated speed 2,200 rpm
Brakes
• Service – 4 wheel, wet disc & self adjusting
• Independent tandem by tandem system
• Mechanical parking brake
Axles
• Front axle clearance – 20.3"
• Rear axle – torque proportioning differential
Transmission
• Full power shift with torque converter
• 6 speeds forward – top speed 24 mph
• Electronic shift control
• LCD message center
• Shift inhibit system
Circle
• 53" diameter gear driven circle
• Supported on 4 guides with wear plates
• Shim adjustable
• 360º rotation
• Hydraulic circle side shift
Moldboard/Blade
• “Rollaway” blade with end bits
• Replaceable cutting edges
• Size – 10' x 16.63" x 0.63"
• Lift above ground – 15.4"
• Maximum penetration – 20"
BIG GRADER FEATURES IN A SMALL PACKAGE
OPTIONAL EQUIPMENT
• Cab, includes
– Cloth seat – air suspension
– Defroster fans (2)
– F & R wipers/washers
– Heater, 40,000 BTU
– Inside mirror
– Sliding rear window
– Sound suppression
– Tinted glass
• Cold weather starting aid (ether)
• Dozer – 8' x 2', with skid plates
• Factory air conditioner
• Float control valves, (3)
• Floodlights, (2) F & (2) R
• Mirrors, rearview – external, (2)
• Moldboard – 12' wide
• Moldboard extensions
• Moldboard pitch, hydraulic
• Rear ripper – 75" wide, 3 shanks
• Scarifier – 41" wide, 9 teeth
• Strobe light
• 90º bank slope saddle
21' 7"
15' 6"
9' 10"
The information contained in this brochure is intended to be of general nature only. The manufacturer may at any
time and from time to time, for technical or other necessary reasons, modify any of the details or specifications of
the product described in this brochure. Illustrations do not necessarily show products in standard condition. The
dimensions, weights and capacities shown herein, as well as any conversion data used, are approximate only and
are subject to variations within normal manufacturing techniques. To be sure of getting accurate, detailed and
up-to-date information, any intending buyer should contact NorAm.
Illustration includes optional equipment
STANDARD EQUIPMENT
• Accelerator/decelerator and hand throttle
• Alternator – 100 Amp.
• Articulated frame
• Back-up alarm
• Batteries (2) – 12 volt
• Controls, hydraulic
– Articulation
– Circle side shift
– Circle turn
– Moldboard lift/lower
– Moldboard side shift
– Wheel lean
• Control console, adjustable
• Drawbar
• Engine side panels
• Gauges
– Air cleaner service indicator
– Engine coolant temperature
– Engine oil pressure
– Fuel level
– Hourmeter
– Transmission LCD message center
– Transmission oil temperature
– Voltmeter
• Horn, electric
• Implement control lever lock
• Light package
– Front headlights (2) – hi/lo beam
– Front worklights (2)
– Turn signals, stop and tail lights
• Master electrical switch
• Mechanical parking brake
• Muffler, horizontal under hood
• Moldboard – 10' wide
• Moldboard pitch, manual
• ROPS Canopy with
– Dome light
– Floormat
– Glove box
– Grab handles
– Headliner
– Inside mirror
– Seat belt
• Seat, vinyl – deluxe air suspension
• Steps, right and left
• Tires – 15.00 x 19.5 (8PR) G2 tubeless
• Valve eight station
• Vandalism protection
7' 8"
Full power shift transmission with
torque converter
53" gear driven circle with
“A” frame allows 360º blade rotation
Deluxe cab
Dozer blade
Scarifier
90º Bank slope saddle
65
E
TURBO
| Motor Grader
USA Heritage
Since 1949
Printed in the U.S.A. NS0205
NorAm Construction Equipment
1250 W. Northwest Hwy., # 504
Palatine, IL 60067
847-934-6565