Milton CAT Weiler E1250A - Manual (Page 3)

OPERATOR’S STATION
The operator’s station can be positioned on either side of the
machine by simply lifting a spring-loaded pin and swiveling
the panel. The operator can adjust the steering wheel to a
desired position with the standard tilt wheel feature.
SHIFTING PLATFORM
The platform is capable of shifting 12 inches to either side
of the machine for better visibility to the truck driver as well
as the paver.
FOUR-WHEEL PLANETARY DRIVE SYSTEM
The four-wheel Caterpillar planetary drive system
maximizes pushing power while allowing for a tighter
turning radius and lower center of gravity.
MAIN CONTROLS AT YOUR FINGERTIPS
All of the commonly used functions are located based on real
operator input. A manual push-button override allows the
operator to run the elevator at max capacity without changing
the preset running speed. This provides for quick catch up if a
truck is delayed getting to the hopper.
DIRECT DRIVE MOTORS REDUCE NUMBER OF
WEAR PARTS AND INCREASE RELIABILITY
The elevator is direct drive with two high-torque hydraulic
Motors, the conveyor is driven with one. There are no
gearbox seals, bearings or fluids to worry about. The loop
flush valve keeps the motor cool.
CONVEYOR & ELEVATOR DROP OUT FLOOR
Clean out of the conveyor and elevator is made easy.
Whether cleaning the machine or performing maintenance,
this feature is sure to make the crew and service personnel
jobs easier.