Milton CAT Weiler E650A - Manual (Page 3)

THREE-POINT SUSPENSION SYSTEM
HELPS ENSURE SECURE BOND BETWEEN
MAT AND TACK COAT
The three-point suspension system consists of a
hydraulic cylinder for each of the front wheels, and
a pair of interconnected hydraulic cylinders for the
two rear wheels. Because the two rear wheels are
connected, they are always mirroring each other.
The cylinders adjust the height of the wheels,
which in turn, changes the height of the machine.
ADJUSTABLE SCRAPERS CREATE A CLEAN
WHEEL PATH
Three independent, adjustable scrapers allow
you the flexibility to clean the surface of the
road for the elevator and paver. Scrapers are
located at the rear of the material-feed housing
and extend across the width of the machine.
Scrapers are attached with shear pins that
protect them from damage by obstructions in
the surface being paved.
Pivoting front-wheel arms enable the wheels to be positioned outside the width of the windrow, allowing the
machine to easily pick up off-center windrows.
NEW INSTRUMENT PANEL, DUAL-SIDE OPER-
ATING CONTROLS ENHANCE PRODUCTIVITY
AND SAFETY
Instrument panel gauges, located on the left side of
the machine, include oil pressure, water temperature,
volt meter, fuel, start switch, and hour meter. An
engine warning light alerts the operator to shut
down the engine and helps prevent major damage.
With operational controls on both sides of the
machine, this feature helps protect the operator by
offering a choice to work on either side of the
machine in order to avoid traffic. EASY-ACCESS CHAIN CONTROL LEVER
SAVES TIME
Operator control of chain speed and direction
saves time when the chain needs to be
reversed or speed adjusted.