Hyundai H-1617 - Manual (Page 6)

6
Random
Press the RANDOM button on RC during playback, the unit will select and play a track randomly.
Press the button again to terminate random mode.
Sleep
Press the SLEEP button on RC, display will show “SLEEP 90”. That means, after 90 minutes the unit will automatically turn to standby mode.
Press the SLEEP button again to select the automatically turn off time, from 90, 80, 70, 60, 50, 40, 30, 20, 10 minutes.
Press the SLEEP button to “SLEEP 00” to cancel sleep function.
Line in (AUX in)
Select AUX mode to listen to external audio devices connected through the 3.5 mm Auxiliary Stereo Line-In jack. Press FUNCTION button to select AUX
mode.
Use a 3.5 mm Male-to-Male Stereo cable to connect any external audio device with a 3.5 mm Headphone or Ling-Out jack to the AUX IN jack on the
rear panel of the stereo.
Start playback on the external audio device. Adjust the volume on the audio device (do not set the volume too high to avoid distortion). You may also
adjust the volume on the unit.
Clock Setting
1. Press the STANDBY button to switch unit to standby mode.
2. Press the CLOCK button twice to entry clock set mode. The display will show “24H” and flashing.
3. Adjust time format (12H/24H) by pressing the PREV or NEXT button.
4. Press the CLOCK button to confirm time format; display will show “AM” or “PM” if 12H format is set.
5. Adjust hour by pressing the PREV or NEXT button, press the CLOCK button to confirm.
6. Adjust minute by pressing the PREV or NEXT button, press the CLOCK button to confirm.
Notes: Because clock setting is at standby mode, the display is dim.
Timer setting
Timer setting should be preformed after clock setting is completed.
1. Press the STANDBY button to switch unit at standby mode.
2. Press the CLOCK button on RC to entry timer set mode.
3. The display will show “TIMER ON”, press the CLOCK button to entry “TIMER ON” setting.
4. Adjust hour by pressing the PREV or NEXT button, press the CLOCK button to confirm.
5. Adjust minute by pressing the PREV or NEXT button, press the CLOCK button to confirm.
6. The display will show “TIMER OFF”; press the CLOCK button to entry “TIMER OFF” setting.
7. Adjust hour by pressing the PREV or NEXT button, press the CLOCK button to confirm.