Hyundai H-1612 - Manual (Page 3)

3
· Close the battery compartment cover.
· When the batteries are exhausted, they should be removed from the set to prevent leakage.
AC OPERATION
· The appliance is for household use only.
· Before the first connecting of the appliance check that voltage indicated on the rating label corresponds the mains voltage in your home.
· Insert the plug into the power supply.
· The set is now working as radio receiver with digital clock and it will flash the clock figures to show you it is not set correctly.
Radio operation
· Rotate the Volume control regulator clockwise past the click to turn the radio on, thus the Power LED should light up.
· Select your desired broadcasting band with Band switch.
· Rotate the Tuning control regulator to receive the desired broadcast.
· Adjust the level of sound with Volume control regulator.
Antenna
· For FM and SW reception, adjust the telescopic antenna appropriately to obtain the best reception on the band selected.
· The AM or LW antenna is magnetic bar within the system. The set should be placed to a position for the best reception.
Digital clock
· Digital clock operated by individual UM-3 battery.
Clock set button
· Press the Clock SET button once to reveal present date (month/date).
· Press the Clock SET button twice to reveal the reading of the seconds.
· Press the Clock SET button once again to return to the normal clock mode.
Date and time settings
· Press the Clock MODE button twice and then press the Clock SET button to set correct month.
· Press the Clock MODE button once more and then press the Clock SET button to set correct date.
· Press the Clock MODE button one more time and then press the Clock SET button to set correct hours.
· Press the Clock MODE button once more and then press the Clock SET button to set correct minutes.
· Press the Clock MODE button one more time to return to the clock mode.
· Press the Clock SET button to resume time operation with colon flashing.