VEGA VEGABAR 86 HART and accumulator pack - Quick setup guide - Manual (Page 9)

9
4 Connecting to power supply
VEGABAR 86 • HART and accumulator pack
46320-EN-131125
4 Connecting to power supply
4.1 Connection of the battery charger
We recommended charging the integrated accumulator completely
before setting up the instrument. You can find the charging time in
chapter "Technical data".
The battery charger is plugged into a socket in the supply room, see
chapter "Wiring plan".
The LEDs in the supply room show the charging process and condi-
tion of the accumulator, see chapter "Wiring plan".
4.2 Wiring plan
2
1
Fig. 3: Position of the power supply and electronics compartment
1 Supply room (accumulator)
2 Electronics compartment
5 6 7 8
4...20mA
2
1 2 + ( ) (-)
1
Fig. 4: Electronics compartment, double chamber housing
1 Internal connection to the connection compartment
2 Contact pins for the display and adjustment module
Overview
Electronics compartment