VEGA KV 31 Mounting brackets For tubes with ø 200…400 mm (Vertical sensor mounting) - Manual (Page 7)

3 Shorten the threaded rods after mounting to avoid injuries.
If there are gaps or intervening spaces around the installation, provide
protective fences or grids to keep hands away from the dangerous
area. Such areas must be marked accordingly.
Install a protective grid on both sides of the mounting bracket. A sheet
metal cover or a correspondingly shaped plastic sheet can also be
used.
Corresponding holes for screws of size M5 are provided on the
mounting bracket.
Mount the protective grid according to the following assembly drawing:
M5
1
2
Fig. 4: Install the protective grid on both sides of the mounting bracket
1 Protective grid
2 Screws M5 - 4 pcs.
Install a protective grid
Mounting brackets KV 31 • Source holder SE 7
2 Mounting
41406
-
EN
-120228