VEGA VEGABAR 51 4 … 20 mA_HART - Manual (Page 8)

8
3 Product description
VEGABAR 51 • 4 … 20 mA/HART
36713-EN-130321
2
1
13
10
5
4
3
6
7
8
9
11
12
14
Fig. 2: Layout of the type label (example)
1 Instrument type
2 Product code
3 Approvals
4 Measuring range
5 Process pressure
6 Process temperature
7 Electronics, voltage supply
8 Protection rating
9 Order number
10 Serial number
11 Data-Matrix-Code for Smartphone-App
12 Material process seal
13 ID numbers, instrument documentation
14 Notified authority for CE marking
With the serial number, you can access the delivery data of the instru-
ment via www.vega.com, "VEGA Tools" and "serial number search".
In addition to the type label outside, you can also find the serial num-
ber on the inside of the instrument.
Instruments in the version "Oil and grease-free for oxygen applica-
tions" or "Oil, grease and silicone-free for lacquers" are equipped with
an optional label. The optional label contains references to the oil,
grease and silicone-free parts of the instrument.
This operating instructions manual applies to the following instrument
versions:
•
Software from 3.82
3.2 Principle of operation
The VEGABAR 51 is a pressure transmitter with chemical seal for
pressure measurement of highly corrosive and hot liquids.
The process pressure acts on the sensor element via the stainless
steel diaphragm and an internal transmission liquid. This causes a
resistance change which is converted into a corresponding output
signal and outputted as a measured value. With measuring ranges
up to 16 bar a pieoresistive sensor element is used, with measuring
ranges from 25 bar a strain gauge (DMS) sensor element.
Optional label
Scope of this operating
instructions manual
Application area
Functional principle