VEGA VEGAPULS 66 (≥ 2.0.0 - ≥ 4.0.0) enamel Foundation Fieldbus - Manual (Page 25)

25
5 Connecting to the bus system
VEGAPULS 66 enamel • Foundation Fieldbus
36530-EN-121011
+
Bus
2
3 1 2 ( ) (-)
1
Fig. 19: Connection compartment, double chamber housing
1 Voltage supply, signal output
2 For indicating and adjustment module or interface adapter
3 Ground terminal for connection of the cable screen
1
Bus
USB
Status
Test
SIM-Card
1 2 + ( ) (-)
Fig. 20: CConnection of the voltage supply of the radio module
1 Voltage supply
You can find detailed information for connection in the supplementary
instructions "PLICSMOBILE GSM/GPRS radio module".
5.5 Wiring plan, double chamber housing Ex d
5
0
1
0
1
+ 6 7 8
Bus
2
3
1 2 ( ) (-)
1 1
Fig. 21: Electronics compartment, double chamber housing
1 Internal connection to the connection compartment
2 Contact pins for the indicating and adjustment module or interface adapter
3 Simulation switch ("on" = simulation mode)
Connection compartment
Radio module PLICSMO-
BILE integrated in the
connection compartment
Electronics compartment