VEGA VEGABAR 55 4 … 20 mA_HART - Manual (Page 58)

58
10 Supplement
VEGABAR 55 • 4 … 20 mA/HART
36734-EN-130321
Ʋ 100 Hz … 10 kHz U
ss
< 10 mV
Load see diagram
1000
750
500
250
12 18 16 14 20 22 24 26 28 30 32 34 36
Ω
V
4
1
2
3
Fig. 29: Voltage diagram
1 HART load
2 Voltage limit Ex-ia instrument
3 Voltage limit non-Ex/Ex-d instrument
4 Operating voltage
Electrical protective measures
Protection rating
Ʋ Housing, standard IP 66/IP 67 16)
Ʋ Aluminium and stainless housing
(optionally available)
IP 68 (1 bar) 17)
Ʋ Process component in IP 68 version IP 68 (25 bar)
Ʋ External housing IP 65, IP 66/IP 68 (0.2 bar)
Overvoltage category III
Protection class II
Functional safety (SIL)
Functional safety is already activated on instruments with SIL qualification ex factory. On instru-
ments without SIL qualification ex factory, the functional safety must be activated by the user via
the display and adjustment module or via PACTware for applications according to SIL.
Functional safety according to IEC 61508-4
Ʋ Single channel architecture (1oo1D) up to SIL2
Ʋ double channel diversitary redundant
architecture (1oo2D)
up to SIL3
You can find detailed information in the supplied Safety Manual of the instrument series or under
"www.vega.com", "Downloads", "Approvals".
Approvals
Instruments with approvals can have different technical data depending on the version.
16) Instruments with gauge pressure measuring ranges cannot detect the ambient pressure when submerged, e.g.
in water. This can lead to falsification of the measured value.
17) Only with instruments with absolute pressure ranges.