VEGA Filter element - Manual (Page 5)

3 P roduct description
3.1 C onfiguration
The scope of delivery encompasses:
l
Filter element
l
Documentation
-
This supplementary instruction
3.2 P rinciple of operation
Power supply units that do not correspond to the current
electrical standard, often have an insufficient smoothing of the
voltage. When the caused residual ripple is too high for a
reliable operation, this is recognized by the internal energy
management of the sensor.
The sensor remains at a current value of 3.6 mA.
With the filter element, the sensor can be used also in systems
with high residual ripple.
The filter element must not be mounted in systems with Ex
approval.
Warning:
The filter element must not be mounted in systems rated with
SIL.
l
The filter element cannot be used in combination with a
heating for the indicating and adjustment module.
l
No HART signal can be transmitted when the filter elment
is mounted
3.3 S torage and transport
Your instrument was protected by packaging during transport.
Its capacity to handle normal loads during transport is assured
by a test according to DIN EN 24180.
The packaging of standard instruments consists of environ-
ment-friendly, recyclable cardboard. For special versions, PE
foam or PE foil is also used. Dispose of the packaging material
via specialised recycling companies.
Scope of delivery
Application range
Packaging
Filter element 5
Product description
35028
-
EN
-080619