VEGA VEGACAP 63 Screening tube adapter Rod ø 16 mm - Manual (Page 2)

2
1 Product description
Screening tube adapter • for VEGACAL 63, 64/VEGACAP 63
34849-EN-130916
1 Product description
The screening tube adapter can be used for all VEGACAP 63 and
VEGACAL 63 and 64 sensors with rod ø 16 mm (0.63 in).
Typical applications of the screening tube adapters are e.g. for con-
densation or sockets.
Apart from the standard version there is a second version for vacuum
with a special seal.
When the screening tube adapter is submerged in liquid, we recom-
mend the use of a vacuum-tight version.
The following versions of the screening tube adapter are available:
Screening against condensation
•
Screening against measurement faults caused by condensation.
•
Screening against high capacitances caused by installation condi-
tions. This can occur, e.g. in long sockets.
Capacitive screening, vacuum-tight
•
Screening against high capacitances caused by installation condi-
tions. This can occur, e.g. in long sockets. In addition, the screen-
ing tube is vacuum-tight.
In case of strong condensation, the draining of condensed water
can change the measurement accuracy. The suitable version is the
Screening against condensation. The condensation can drain off
outside on the screening tube adapter.
In case of long sockets, the screening tube can increase the sensitiv-
ity of the probe by compensating the influences of the socket. The
suitable version is Capacitive screening, vacuum-tight.
When the probe is mounted laterally, buildup can accumulate in the
socket. A screening tube makes the covered part of the probe inactive
and hence insensitive to influence from buildup and socket. Hence,
the screening tube adapter excludes changing influences caused by
the medium and ensures stable measurement conditions. The suit-
able version is Capacitive screening, vacuum-tight.
Condensation
Socket