VEGA VEGAVIB - External housing - Manual (Page 9)

4 Mounting
4 .1 General instructions
In the following cases, we recommend using an instrument version
with external housing:
l
if the standard housing is too big
l if strong vibrations can damage the electronics
In Ex applications, only a housing with appropriate Ex approval must be
used.
4 .2 Mounting preparations
The following tools are required for mounting:
l
Allen key, size 4
l
Fork wrench, wrench size 19
We recommend using further material when mounting the wall
mounting plate.
l
4 screws, depending on the mounting surface
4 .3 Mounting steps
1 Mark the holes according to the following drilling template
2 Depending on the mounting surface, fasten the wall mounting
plate with 4 screws
Tools
Mounting material
Wall mounting
VEGAVIB - External housing 9
4 Mounting
31086
-
EN
-081119