VEGA VEGAPULS 68 Antenna impedance cone - Manual (Page 3)

1 For your safety
1
.
1 Authorised personnel
All operations described in this operating instructions manual must be
carried out only by trained specialist personnel authorised by the plant
operator.
During work on and with the device the required personal protective
equipment must always be worn.
1
.
2 Appropriate use
The antenna impedance cone is a replacement part for VEGAPULS 62
and 68 radar sensors.
1
.
3 Warning about misuse
Inappropriate or incorrect use of the instrument can give rise to
application-specific hazards, e.g. vessel overfill or damage to system
components through incorrect mounting or adjustment.
1
.
4 General safety instructions
The safety information in the operating instructions manual of the
respective sensor must be noted.
1
.
5 Safety instructions for Ex areas
Please note the Ex-specific safety information for installation and
operation in Ex areas. These safety instructions are part of the
operating instructions manual and come with the Ex-approved
instruments.
Use in dust-Ex applications is not permitted.
Antenna impedance cone • for VEGAPULS 62 and 68 3
1 For your safety
31381
-
EN
-100413