VEGA VEGAWAVE 62 - Relay (DPDT) - Manual (Page 12)

d
d 6
1
2
3
Fig. 4: Filling in the centre, emptying laterally
1 VEGAWAVE 62
2 Discharge opening
3 Filling opening
The vibrating element should protrude into the vessel to avoid buildup.
For that reason, avoid using mounting bosses for flanges and screwed
fittings. This applies particularly to use with adhesive products.
If VEGAWAVE 62 is mounted in the filling stream, unwanted false
measurement signals can be generated. For this reason, mount
VEGAWAVE
62 at a position in the vessel where no disturbances, e.g.
from filling openings, agitators, etc., can occur.
Socket
Inflowing medium
12 VEGAWAVE 62 • - Relay (DPDT)
4 Mounting
32252
-EN
-120418