beautypg.com

Philips SRU5110 User Manual

Page 5

background image

ENGLISH

5

Installing the remote control

Press the SET UP key until the LED flashes twice and then remains
lit.

Then enter the code noted in step 2 using the numeric keys.

• The LED now flashes twice.
If the LED flashes once for an extended period, the code has not

been entered properly or the wrong code has been entered.
Start again from step 2.

Press and hold the Standby key of the SRU 5110 until your TV
switches off (standby).
Then release the key immediately.

• The SRU 5110 is now set to operate your TV.
Check if you can operate all functions on your TV with the SRU 5110.
• If a key does not function properly, keep it pressed until it works.

Then release the key immediately.
Repeat this for every key that does not work.

• If the TV responds to all of the key commands, the SRU 5110 is

ready for use.
Do not forget to note your code.

Keep the SET UP key pressed for 5 seconds to exit setup mode.
• When no key is pressed for 2 minutes or more the remote control will

exit setup mode automatically.

7

7

7

6

6

6

5

5

5

4

4

4

3

This manual is related to the following products: