beautypg.com

5 accessories and replacement parts – VEGA VEGACAP 63 - two-wire User Manual

Page 10

background image

10

3 Product description

VEGACAP 63 • - two-wire

30011-EN-130916

Transport must be carried out in due consideration of the notes on the

transport packaging. Nonobservance of these instructions can cause

damage to the device.

The delivery must be checked for completeness and possible transit

damage immediately at receipt. Ascertained transit damage or con-

cealed defects must be appropriately dealt with.

Up to the time of installation, the packages must be left closed and

stored according to the orientation and storage markings on the

outside.
Unless otherwise indicated, the packages must be stored only under

the following conditions:

Not in the open

Dry and dust free

Not exposed to corrosive media

Protected against solar radiation

Avoiding mechanical shock and vibration

Storage and transport temperature see chapter "Supplement -

Technical data - Ambient conditions"

Relative humidity 20 … 85 %

3.5 Accessories and replacement parts

The protective cover protects the sensor housing against soiling and

intense heat from solar radiation.
You will find additional information in the supplementary instructions

manual "Protective cover" (Document-ID 34296).

Screwed flanges are available in different versions according to the

following standards: DIN 2501, EN 1092-1, BS 10, ANSI B 16.5,

JIS B 2210-1984, GOST 12821-80.
You can find additional information in the supplementary instructions

manual "Flanges according to DIN-EN-ASME-JIS" (Document-ID

31088).

Condensation

In case of strong condensation, the draining of condensed water

can change the measurement accuracy. The suitable version is the

Screening against condensation. The condensation can drain off

outside on the screening tube adapter.
Typical applications of the screening tube adapters are e.g. for

condensation or sockets. Apart from the standard version, there is

a second version for vacuum with a sepcial seal. When the screen-

ing tube adapter is submerged in liquid, we recommend the use of a

vacuum-tight version.

Transport

Transport inspection

Storage

Storage and transport

temperature

Protective cap

Flanges

Screening tube adapter