VEGA VEGAVIB 65 - transistor output - Manual (Page 12)

Warning:
The housing must not be used to screw in the instrument!
Applying tightening force on the housing can damage its
internal mechanical parts.
To screw in, use the hexagon above the thread.
4.2 Mounting information
The vibrating element should protrude into the vessel to avoid
buildup. For that reason, avoid using mounting bosses for
flanges and screwed fittings. This is mainly applicable for
adhesive products.
Install the instrument in such a way that the tuning fork does
not protrude directly into the filling stream. Should such an
installation location be necessary, mount a suitable baffle
above or in front of the tuning fork.
If such an installation location should be necessary, mount a
suitable protective sheet above or in front of the vibrating
element - see illustration a.).
In abrasive solids, mounting according to illustration b. has
proven. A spout forms in the concave protective sheet
preventing wear of the protective sheet.
To achieve a very precise switching point, you can install
VEGAVIB 65 horizontally. However, if the switching point can
have a tolerance of a few centimeters, we recommend
mounting VEGAVIB 65 approx. 20° inclined to the vessel
bottom to avoid buildup.
Socket
Filling opening
Horizontal installation
12 VEGAVIB 65 - with transistor output
Mounting
29285
-EN
-060508