VEGA Plug connector 7-8" Foundation Fieldbus for continuously measuring sensors - Manual (Page 3)

1 For your safety
1.1 Appropriate use
Plug connectors belong to the accessories for level, switching
and pressure sensors. They provide a detachable connection
to power supply/signal processing for two-wire sensors. Those
are sensors whose power supply as well as measurement
signal are transmitted over one pair of wires.
1.2 Impermissible use
As a rule, plug connectors are not allowed to be used with four-
wire instruments. Those are sensors whose power supply and
measurement signal are transmitted over two separate pairs of
wires.
1.3 General safety instructions
The safety instructions in the operating instructions manual of
the respective sensor must be noted.
1.4 Safety information for Ex areas
Please note the Ex-specific safety information for installation
and operation in Ex areas. These safety instructions are part of
the operating instructions manual and come with the Ex-
approved instruments.
For instruments with Exd or StEx approval, the use of plug
connectors is not allowed.
Plug connector 7/8" Foundation Fieldbus - for continuously measuring sensors 3
For your safety
30373
-EN
-050802