VEGA VEGAVIB 55 - two-wire - Manual (Page 17)

For connection to a signal conditioning instrument. The sensor
is powered via the connected signal conditioning instrument.
For further information see the "Technical data" in the
"Supplement".
The wiring example is applicable for all suitable signal
conditioning instruments.
If the mode switch of VEGAVIB 55 is correctly set to "max.",
the control lamp on VEGAVIB 55 lights.
l red - with submerged vibrating element
l
green - with uncovered vibrating element
Take note of the operating instructions manual of the signal
conditioning instrument. Suitable signal conditioning instru-
ments are listed in chapter "Technical data".
1
Fig. 9: Wiring plan
1 Voltage supply
Wiring plan
VEGAVIB 55 - - two-wire 17
Connecting to voltage supply
29304
-EN
-070109