VEGA VEGAVIB 63 - contactless electronic switch - Manual (Page 28)

Density
-
Standard > 0.05 g/cm³ (0.002 lbs/in³)
-
adjustable > 0.02 g/cm³ (0.0007 lbs/in³)
Granular size no limitation 1)
Electromechanical data
Cable entry/plug (dependent on the version)
-
Single chamber housing l
1 x cable entry M20 x 1.5 (cable: ø 5 … 9 mm),
1 x blind stopper M20 x 1.5; attached 1 x cable
entry M20 x 1.5
or:
l
1 x cable entry ½ NPT, 1 x blind stopper ½ NPT,
1 x cable entry ½ NPT
or:
l
1 x plug M12 x 1; 1 x blind stopper M20 x 1.5
Spring-loaded terminals for wire cross-section up to 1.5 mm² (AWG 16)
Adjustment elements
Mode switch
-
Min. Min. detection or dry run protection
-
Max. Max. detection or overflow protection
Voltage supply
Operating voltage 20 … 253 V AC, 50/60 Hz, 20 … 253 V DC
Domestic current requirement approximately 3 mA (via load circuit)
Load current
-
Min. 10 mA
-
Max. 400 mA (at I > 300 mA the ambient temperature can
be max. 60 °C/140 °F) max. 4 A up to 40 ms
Electrical protective measures
Protection rating IP 66/IP 67
Overvoltage category III
Protection class I
Approvals
Instruments with approvals can have different technical data depending on the version.
That's why the associated approval documents have to be noted with these instruments. They are
part of the delivery or can be downloaded under www.vega.com via "VEGA T
ools" and "serial
number search" as well as via "Downloads" and "Approvals".
1) max. 20 mm (0.8 in) with product density < 0.05 g/cm³ (0.002 lbs/in³).
28 VEGAVIB 63 • - contactless electronic switch
9 Supplement
29278
-EN
-120418