VEGA ARV60.CB4 up to 64 bar - Manual (Page 6)

6 Lock fitting ARV60.CB4 up to 64 bar
Technical data
3 Technical data
3.1 Technical data ARV60.CB4
Thread size (mounting boss) G 1 A, G1½ A or 1 NPT, 1½ NPT
Tube diameter of the sensor ø 21.3 mm (DIN 2463/2462 D4-T3)
Material steel 1.4435 (316L) or Hastelloy C22 (2.4602)
Screws (2) hexagon socket screws DIN 912 M6 x 25
material A4-70 acc. to AD regulation W2
accessory spring rings (1) B6
material A4 acc. to DIN 7980
Holding screw (5) hexagon socket screws DIN 7964 M4 x 10
material A4-70; accessory spring ring (4) B4
material A4 acc. to DIN 7980
Product temperature -50°C … +250°C
Operating pressure
- ARV60.CA4…
64 bar
note the nominal pressure of the sensor. The
lowest permissible operating pressure is valid.
Torque
- screws (2)
7 ±2 Nm
- compression screw (10) 80 ±10 Nm
Approvals:
DruckbehV
The TÜV Rheinland has tested the lock fitting ARV60.CB4 and approved it acc. to DruckbehV.
Ex, WHG
The lock fitting ARV60.CB4 in conjunction with suitable VEGA sensors (e.g. VEGASWING 63)
is approved acc. to WHG or for Ex-Zone 0. Note the corresponding certificates of the sen-
sors.