VDO Z1 - Manual (Page 28)

19
INSTRUCTION MANUAL
∂ ƒ Setting the first digit
‚ ALTI UP 1 SET DONE / ALTI UP 2 SET DONE
/ WALK UP SET DONE
Automatic return to the operation mode for TOTAL UP. Annual uphill
altitude gain set done.
8.4. ANNUAL DOWNHILL ALTITUDE LOSS BIKE 1 AND BIKE 2 AND WALK
MODE
Setting the annual downhill altitude loss
3 sec.
ç Setting mode LANGUAGE SELECT
∂ ƒ ALTI DOWN SET
‚ ALTI DOWN 1 SET (for bike 2 or
walking ƒ ALTI DOWN 2 SET / WALK DOWN SET)
‚ ALTI DOWN 1 NEXT DIGIT / ALTI DOWN 2 NEXT DIGIT
/ WALK DOWN NEXT DIGIT
∂ ƒ Set last digit (keep button depressed for fast
run-through)
‚ ... repeat for all digits from back to front
‚ ALTI DOWN 1 ?SET OK? / ALTI DOWN 2
?SET OK? / WALK DOWN ?SET OK?
∂ ƒ Setting the first digit
‚ ALTI DOWN 1 SET DONE / ALTI DOWN 2 SET DONE /
WALK DOWN SET DONE
Automatic return to the operation mode for TOTAL DOWN
Annual downhill altitude loss set done
9. RESET MODE
In reset mode of your VDO computer you reset the saved ride data of
the bicycle computer. You can also reset the computer to the factory
settings
9.1 TRIP DATA
ATTENTION: When resetting the trip data the following day trip data will
be deleted:
- Daily distance
- Trip ride time
- Average speed
- Maximum speed
- Uphill altitude gain
- Downhill distance
- Maximum trip altitude
- Average ascending gradient
- Maximum ascending gradient
- Downhill altitude loss
- Downhill distance
- Average descending gradient
- Maximum descending gradient
If the cadence option is mounted then the cadence data will also be
reset.
- Average cadence
- Maximum cadence
3 sec. √ TRIP DATA ?RESET?
‚ TRIP DATA ?RESET? <> flashing