VEGA VEGAVIB 63 Lock fitting ARV-VB63.B – pressure range: -1…25 bar - Manual (Page 7)

7 Tighten the terminal screws (2) alternately. Make sure that
the gap between clamps and pressure screw is in parallel.
Tighten the terminal screws up to a torque of 4 ±1 Nm
(3 ±0.7 lbf ft).
Hence the clamps (11) are pressed against the tube and fix
the tube of the sensor in this position
8 Fasten the locking angle (3) with the hold screw (5) and the
spring ring (4) laterally on the pressure screw (10)
Hence the pressure screw and the terminal screws are
protected against unintentional loosening
Lock fitting ARV-VB63.B - – pressure range -1 … 25 bar 7
Mounting
20036
-EN
-050804