VIEWSONIC VPC190 - Manual (Page 23)

Operating
ViewSonic VPC190 14
Using the Power Button
Turning On the All-in-One PC
Press the power button to turn on your All-in-One PC.
WARNING
Do not turn off your computer before it fully boots or it may cause an error the next
time you turn on your All-in-One PC.
Turning Off the All-in-One PC
In Windows 7 ® Home Premium, click Start > shutdown > or push the power button.
NOTE
You can configure Windows to automatically shut down when you press the power
button. To do this, click Start > Control Panel > Power Options > Advanced tab. In
the Power buttons option, select “Shut down” from the list. Be sure to shut down all
running applications before powering off.
Using the Card Reader
The built in card reader supports four types of memory cards, such as SD (SD 2.0
included), MMC, MS, and MS Pro.
Inserting the card
1. Insert the card with the metallic connectors facing towards you.
2. Push gently until the card clicks into place.
Removing the card
NOTE
Before removing a memory card, use the configuration utility on the taskbar to stop
the memory card operation. Failure to do so may result in data loss.
1. Push the card gently to eject it.
2. Pull the card out from the port.