Wiha Tools Torque tools - Manual (Page 19)

90
Wiha T-handle torque tools.
For screw applications requiring a specific amount of force.
Perfectly shaped.
The special feature of these tools is
the ergonomic, multi-component
T-handle with the striking soft
zones that allow particularly
comfortable and effortless power
transmission, even at higher
torques.
Sophisticated mechanism.
The T-handle’s extremely light,
multi-component plastic sleeve
conceals a precise torque
mechanism. This is sealed in an
oil-lubricated bearing and is thus
extremely low-wear with a long
tool life. As soon as the pre-set
torque has been attained, there is
a clearly audible and perceptible
click to prevent exceeding the
pre-set value. Overtightening of
the pre-set value is therefore
eliminated. Release accuracy is
±6% of the pre-set scale value,
as required by EN ISO 6789.
To prevent users from breaking
the blade or damaging the screw
when loosening the screw,
the tools limit the tightening
torque, as well as apply a special
limit to the loosening torque;
this is approximately 30 % greater
than the tightening torque.
Fixed or variable setting of torque
value.
Depending on the intended
application, we recommend one
of the TorqueFix
® -Tplus models
with a pre-set, fixed torque value or
the TorqueVario
® -STplus with scale
and a variable torque value from
5 - 14 Nm. In the case of the
variable T-handle tool, the torque
value is continuously adjustable
on the handle via the adjustment
tool supplied with it.
The numerical display of the
setting value in the upper handle
enables the pre-set value to be
easily read-off in Nm; this virtually
eliminates incorrect readings.
Tightening screws properly!
Even in higher torque ranges?
No problem with the new ergonomic
T-handle torque tools from Wiha.
Tightening screws to a pre-set
torque has never been so easy,
comfortable and economical!
EN_s072-093_Dreh_2012 16.02.12 10:00 Seite 90