Wiha Tools TorqueVario-S ESD - Manual

278
Wiha Torque ESD torque range.
Wiha TorqueVario ® -S ESD
with integrated scale.
Specially designed for applications
on electrostatic sensitive components
and devices that may be damaged
by electrostatic fields or discharges.
The dissipative handle and blade
coating, with a surface resistance
of 10
6 – 10 9 Ohms, controls electro-
static energy discharge. Four models
cover torque ranges from 0.1 Nm up
to 5.0 Nm.
Wiha SoftFinish ® ESD
screwdrivers have a surface
resistance of 10
6 – 10 9 ohms.
…in electronic assemblies and ESD
protected zones, where electrostatic sensi-
tive components and devices must be
grounded, the TorqueVario
® -S ESD should
be used.
Wiha Torque ESD
torque range.
• Dissipative handle designed
to discharge uniformly, surface
resistance 10
6 – 10 9 Ohm
• Meets ESD standard IEC 61340-5-1
• Ergonomic SoftFinish ®
multicomponent handle
guarantees comfortable work
and optimised handling
• Ergonomic handle sizes that are
proportional to the torque ranges
• Each tool is individually
tested and marked with
an identification number
• Clearly audible and perceptible
click on attaining the pre-set
torque
• Interchangeable blades
are made from high quality-
chrome- vanadium steel
• Universal bit holder for all
C 6.3 and E 6.3 bits, adapter
blade for 1/4" nuts
• Fulfills all accuracy
requirements as defined by
EN ISO 6789, BS EN 26789
and ASME B 107.14M
• Torque accuracy ± 6% of
the pre-set scale value
• Delivered with factory
calibration certificate
Safety Notice:
Wiha ESD screwdrivers are non-
insulated, therefore not suitable
for working on live parts.