Wiha Tools Screwdrivers - Manual (Page 59)

66
362ESD SoftFinish ® ESD TORX ® screwdriver.
Dissipative handle, ESD-safe.
Blade: High quality chrome-vanadium-molybdenum steel, through hardened,
chrome-plated.
Wiha ChromTop ® finish on tip for a perfect fit every time.
Handle: Ergonomic Wiha SoftFinish ® multi-component handle with
roll-off protection. Surface resistance 10 6 - 10 9 ohms.
Standards: IEC 61340-5-1.
Application: For working on electrostatically sensitive components.
Safety Notice:
Wiha ESD screwdrivers are
noninsulated, therefore not
suitable for working on live parts.
For TORX ® screws.
Order-No.
31432 T3 60 2,5 164 23 10
27148 T4 60 2,5 164 23 10
27641 T5 60 3,5 164 23 10
27149 T6 60 3,5 164 23 10
31901 T7 60 3,5 164 23 10
22436 T8 60 3,5 164 23 10
27145 T9 60 4,0 171 30 10
27144 T10 80 4,0 191 30 10
27146 T15 80 4,0 191 30 10
27147 T20 100 4,0 218 36 10
Sets.
302ESD HK5 01 SoftFinish ® ESD slotted/ Phillips screwdriver set, 5 pcs.
Dissipative handle, ESD-safe.
Blade: High quality chrome-vanadium-molybdenum steel, through hardened,
chrome-plated.
Wiha ChromTop ® finish on tip for a perfect fit every time.
Handle: Ergonomic Wiha SoftFinish ® multi-component handle with
roll-off protection. Surface resistance 10 6 - 10 9 ohms.
Standards: IEC 61340-5-1.
Application: For working on electrostatically sensitive components.
Order-No. Series
27252 302ESD HK5 01 1
302ESD 3.0x100 4.0x100
311ESD PH0x60 PH1x80 PH2x100
362ESD K5 SoftFinish ® ESD TORX ® screwdriver set, 5 pcs.
Dissipative handle, ESD-safe.
Blade: High quality chrome-vanadium-molybdenum steel, through hardened,
chrome-plated.
Wiha ChromTop ® finish on tip for a perfect fit every time.
Handle: Ergonomic Wiha SoftFinish ® multi-component handle with
roll-off protection. Surface resistance 10 6 - 10 9 ohms.
Standards: IEC 61340-5-1.
Application: For working on electrostatically sensitive components.
Order-No. Series
27253 362ESD K5 1
362ESD T6x60 T8x60 T9x60
T10x80 T15x80
Wiha SoftFinish ® ESD.
For use on electrostatically sensitive components.
EN_s008-071_SD_2012 14.02.12 18:50 Seite 66