Vutec RPL-02 - Installation Instructions - Manual (Page 6)

5
ADJUSTMENTS
Referring to Figure 2, The four thumbscrews provide a mean to fine tune and leveling the
traveling platform to flush with inside tabletop. Loosen the hex nuts on the thumbscrews and
adjust by turning each thumbscrew up or down. Once the platform flushes with inside tabletop,
tighten the hex nuts.
Be sure the video cables and the projector power cord are locate and tie down properly inside
and bottom of the traveling platform.
Note:
DO NOT PLACE HEAVY OBJECTS ON TOP OF TABLETOP THAT MIGHT EXCEED THE LIFT’S
LIFTING CAPACITY.