VTech CS6649_-2-3 Manual - Manual (Page 64)

Appendix
60
Screen messages
NO BATTERY The handset in the handset charger has no battery installed.
No line There is no telephone line connected.
No message There is no message recorded in the answering system.
Not available Someone else is using the directory, caller ID log history or
the answering system.
Number repeated The telephone number you have entered is already in
the directory.
Out of range or
no pwr at base The handset has lost connection to the telephone base.
Outside call You are on the external call during call transfer.
Phone The handset/telephone base is on a call.
Put in charger The handset battery is very low. Put the handset in the
handset charger for recharging.
Quiet mode on The quiet mode is turned on.
Quiet mode off The quiet mode is turned off.
Rec mem full The system recording time is full.
Recording... The answering system is recording a message or memo.
Registered The handset is successfully registered to the
telephone base.
Registering... The handset is registering to the telephone base.
Ringer muted The ringer is muted temporarily when it is ringing.
Ringer off The ringer is turned off.
Saved Your selection has been saved.
Speaker The speakerphone is in use.
To register HS
See manual Screen display on a non-registered handset.
Transferred You have transferred an outside call to another cordless
handset or the telephone base.
Unable to call
Failed phone call (the telephone line is in use).
Failed intercom or conference call (there are already two
handsets being used).
The handset is out of range while on a call.