VTech A2321 Manual - Manual (Page 11)

Analog Corded 1-line/2-line Petite Phone - A2211/A2221
Analog Corded 2-line Trimstyle Phone - A2321
Telephone settings
Voicemail voltage detection
There are 3 options to set the voicemail voltage detection on the telephone base.
To disable the voicemail voltage detection:
Use a narrow object to unplug all the jumpers from the telephone base.
Place the sticker back in place.
To set the voicemail voltage detection by the periodic low voltage pulse
detection method:
Use a narrow object to unplug all the jumpers from the telephone base. Then plug the
jumpers into 1 , 2 and 3 .
Place the sticker back in place.
To set the voicemail voltage detection by the steady high voltage and periodic high voltage pulse detection method:
Use a narrow object to unplug all the jumpers from the telephone base. Then plug the jumpers into 1 , 2 and 4 .
Place the sticker back in place.
Speed Dial keys
For models A2211 and A2221, there are up to 11 programmable guest-service (Speed Dial) keys. Program these keys to
automatically dial telephone numbers or to activate telephone system features.
To program a Speed Dial key in A2211:
Remove the faceplate and overlay if they are on the telephone base. Lift the handset, then press the recessed PROGRAM key.
The MUTE key flashes when in administrator mode.
Press the desired Speed Dial key where the telephone number is to be stored. You hear a beep.
Enter the telephone number (up to 16 digits).
To insert a pause in the stored number, press the recessed PAUSE key.
The telephone stores the number automatically when 16 digits are entered. When the number has less than 16 digits, press the
recessed PROGRAM key again. You hear a beep as confirmation.
To program a Speed Dial key in A2221:
Remove the faceplate and overlay if they are on the telephone base. Lift the handset, then press the recessed PROGRAM key.
The MUTE key flashes when in administrator mode.
Press the desired Speed Dial key where the telephone number is to be stored. You hear 3 beeps.
Enter the telephone number (up to 16 digits).
To insert a pause in the stored number, press the recessed PAUSE key.
The telephone stores the number automatically when 16 digits are entered. When the number has less than 16 digits, press the
recessed PROGRAM key again. You hear 3 rising beeps as confirmation.
To clear the programmed Speed Dial key in A2221:
Remove the faceplate and overlay if they are on the telephone base. Lift the handset, then press the recessed PROGRAM key.
The MUTE key flashes when in administrator mode.
Press the Speed Dial key where the telephone number is to be deleted. You hear 3 beeps. Press the recessed PRO GRAM key
again. You hear 3 rising beeps as confirmation.
1.
2.
1.
2.
1.
2.
1.
2.
3.
•
4.
1.
2.
3.
•
4.
1.
2.
1
2
3
4