VTech CS6329_-2-3-4-5 Manual - Manual (Page 17)

13
Telephone settings
Dial mode
The dial mode is preset to tone dialing. If you have pulse
(rotary) service, you must change the dial mode to pulse
dialing before using the telephone.
Press MeNU/
SeLeCT
when the handset is not in use.
Press VOL/ or VOL/
CID
to select > SeTTINGS,
then press
MeNU
/SeLeCT.
Press VOL/ or VOL/
CID
to select > DIAL MODe,
then press
MeNU
/SeLeCT.
Press VOL/ or VOL/
CID
to choose TONe
or PULSe.
Press
MeNU
/SeLeCT to confirm your selection.
1.
2.
3.
4.
5.
home area code
If you dial your local calls using only seven digits (area
code not required), you can program your home area code
so that when you receive a call within your local area, the
telephone number is automatically stored without the area
code in the call log.
Press MeNU/
SeLeCT
when the handset is not in use.
Press VOL/ or VOL/
CID
to select > SeTTINGS,
then press
MeNU
/SeLeCT.
Press VOL/ or VOL/
CID
to select
>hOMe AreA CODe, then press
MeNU
/SeLeCT.
Use the dialing keys to enter the desired home area code.
Press
MUTe
/reMOVe to delete a digit.
Press and hold
MUTe
/reMOVe to delete the entire entry.
5. Press
MeNU
/SeLeCT to confirm.
1.
2.
3.
4.
•
•
If, in the future, your telephone service provider requires you to dial the area
code when making a local call, or, if you move to a location that requires it,
delete the home area code you have already programmed, following the
steps above. After you have deleted the home area code, _ _ _ will appear in
the display.
HOME AREA CODE
___
While on a call, press TONe to temporarily change to tone dial mode.
>HOME AREA CODE
DIAL MODE
>DIAL MODE
LCD LANGUAGE
DIAL MODE
>tONE